VSE Condenserless water chiller with scroll or reciprocating compressors

Available on several models equipped with one or more scroll or reciprocating compressors, dimensioned to be used with refrigerant type R410A or with the new low GWP HFO-1234ze or with R290. The units of the VSE series are assembled on a strong self-supporting metal screwed and welded structure, painted with epoxy powder with anti-rust coating for outdoor installation. All units are supplied completely wired and ready to be connected to the user’s plant. Prior to delivery every machine is submitted to a performance test, with intervention tests of all the safety systems and components installed. Each unit is available with compressor sound insulation kit for the LN (Low Noise) and LLN (Super Low Noise) versions, for installation in areas where noise emission must be kept to a minimum.

Cooling capacity: 19 – 611 kW (5.4 – 174 ton)

  • Scroll compressors (R410A)
  • Reciprocating compressors (R290 or HFO-1234ze)
  • Dry expansion evaporator
Length: 1450 – 4110 mm (4.7 – 13.4 ft)
Width: 800 – 1400 mm (2.6  -4.5 ft)
Height: 1560 – 2300 mm (5 – 7.5 ft)
Operating Weight: 486 – 3863 kg (1071 – 8516 lb)
VSE Condenserless water chiller with scroll or reciprocating compressors

A CUTTING-EDGE TEST CENTRE FOR THE HIGHEST ACCURACY

All units are tested in a 120 square metres of our factory are dedicated to a fully equipped test center in order to test our chillers by simulating the environmental conditions of the chambers they will be placed in. The new test bench is able to provide a climatically controlled room for air cooled chiller up to a maximum ambient temperature of 52 °C and a minimum of 0 °C. 

A CUTTING-EDGE TEST CENTRE FOR THE HIGHEST ACCURACY